Presening stations, 2 press the down or up button to select a station, To search for a station quickly (auto search) – Aiwa NSX-AV900 User Manual

Page 9: When an fm stereo broadcast contains noise, 2 press the ii set button to store the station, 3 repeat steps 1 and 2, To clear a preset station, To change the am tuning interval, Presetting stations, Manual tuning presening stations

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

RADIO RECEPTION

MANUAL TUNING

PRESEniNG STATIONS

■ REPEAT/

MONO

TUNER

1 Press the TUNER/BAND button repeatedly to

select the desired band.

— FM —►AM —

If the power is turned off, the previously tuned station will be
played (Direct Play Function).

2 Press the DOWN or UP button to select

a station.

Each time the button is pressed, the frequency changes.

When a station is received, “TUNE” is displayed for 2 seconds.

During FM stereo reception, Idcffiil) is displayed.

To search for a station quickly (Auto Search)

Keep the DOWN or ►M UP button pressed until the tuner

starts searching for a station. After tuning in to a station, the
search stops.
To stop the Auto Search manually, press the DOWN or
UP button.
• The Auto Search may not stop at stations with very weak

signals.

When an FM stereo broadcast contains noise

Press the REPEAT/MONO TUNER button on the remote control

so that “MONO” appears on the display.

Noise is reduced, although reception is monaural.

_ a

o uj

3 UJ

o cc

The unit can store a total of 32 preset stations. When a station

is stored, a preset number is assigned to the station. Use the
preset number to tune in to a preset station directly.

1 Press the TUNER/BAND button to select a band,

and press the DOWN or UP button to
select a station.

2 Press the II SET button to store the station.

A station is assigned a preset number, beginning from 1 in
consecutive order for each band.

Frequency

I---------- '

Preset number

3 Repeat steps 1 and 2.

The next station will not be stored if a total of 32 preset stations

have already been stored for all the bands.

To clear a preset station

Select the preset number of the station to be cleared. Then, press

the ■ CLEAR button, and press the

SET button within 4

seconds.
The preset numbers of all other stations in the band with higher
numbers are aiso decreased by one.

MONO

Iliil

.'М-А I ■ ; : I

When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.

To restore stereo reception, press the button so that MONO
disappears.

To change the AM tuning interval

The default setting of the AM tuning interval is 10 khlz/step. If
you use this unit in an area where the frequency allocation system

is 9 kHz/step, change the tuning interval.
Press the POWER button while pressing the TUNER/BAND
button.

To reset the interval, repeat this procedure.

ENGLISH