Basic recording, Preparation, To start recording with the remote control – Aiwa NSX-AV900 User Manual

Page 14: Inserting blank spaces, 2 press the ii button to resume recording, To erase a recording

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

RECORDING

BASIC RECORDING

This section expiains how to record from the tuner, CD piayer, or
externai equipment.

Preparation

• Set the tape to the point where recording wiii start.
• Use Type I (normal) and Type II (high/CrOz) tapes for recording.

1 Insert the tape to be recorded on into Deck 2.

Insert the tape with the side to be recorded on first facing
out from the unit

and the exposed side down.

2 Press the REV MODE button to select the reverse

mode.

To record on one side only, turn on Z.
To record on both sides, turn on Z3 or CI5.

3 Press the DOLBY NR button to turn Dolby NR on

or off.

To record with DOLBY NR, turn on □□ NR.
To record without DOLBY NR, turn off

NR.

4 Press one of the function buttons and prepare

the source to be recorded.

To record from a CD,

press the CD button and load the

disc(s).

To record from a radio broadcast,

press the TUNER button

and tune in to a station.

To record from the connected source,

press the VIDEO/

AUX button and play.

5 Press the # REC/REC MUTE button to start

recording.

When the selected function is CD, playback and recording
start simultaneously.

To stop recording,

press the ■ button.

To pause recording,

press the

button. (Applicable when the

source is TUNER, VIDEO/AUX.) To resume recording, press
again.

To start recording with the remote control

First press the

9/0

REC/REC MUTE button, and then press

the button within 2 seconds.

INSERTING BLANK SPACES

Insertion of 4-second blank spaces enables activation of the
Music Sensor function. (Applicable when the source is TUNER

or VIDEO/AUX.)

1 Press the # REC/REC MUTE button during recording or

whiie in recording pause mode.

I3S on the display flashes for 4 seconds and the tape runs

without recording. After 4 seconds, the deck enters the

recording pause mode.

2 Press the

button to resume recording.

To insert a biank space of iess than 4 seconds,

press the •

REC/REC MUTE button again while Igww is flashing.

To insert blank spaces of more than 4 seconds,

after the

deck enters recording pause mode, press the # REC/REC MUTE
button again. Each time the button is pressed, a 4-second blank
space is added.

To erase a recording

Make sure the microphone is not connected to this unit.

Insert the tape to be erased into deck 2 and press the TAPE/

DECK 1/2 button to display “TAPE 2”.

2 Set the tape to the point where the erasure is to be started.
3 Set the reverse mode by pressing the REV MODE button.
4 Press the • REC/REC MUTE button to start the erasure.

ENGLISH