beautypg.com

Connecting an outdoor antenna, Before operation, Remote control – Aiwa NSX-AV900 User Manual

Page 6: Inserting batteries, When to repiace the batteries, To turn the unit on, Demo (demonstration) mode, To cancel demo mode, Illumination guides, Flash windows

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

CONNECTING AN OUTDOOR ANTENNA

For better FM reception, use of an outdoor antenna is
recommended.
Connect the outdoor antenna to the FM 75 Q. terminals.

BEFORE OPERATION

To connect other optional equipment -» page 22.

REMOTE CONTROL

Inserting batteries

Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.

When to repiace the batteries

The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters

(16 feet). When this distance decreases, replace the batteries

with new ones.

' If the unit is not going to be used for an extended period of

time, remove the batteries to prevent possible electrolyte

leakage. '

' The remote control may not operate correctly when:

- The line of sight between the remote control and the remote

sensor inside the display window is exposed to intense light,
such as direct sunlight

- Other remote controls are used nearby (television, etc.)

■CD

To turn the unit on

Press one of the function buttons (TAPE, TUNER, VIDEO/AUX,
CD).
Playback of the inserted disc or tape begins, or the previously

tuned station is received (Direct Play Function).
The POWER button is also available.
The disc compartment may open and close to reset the unit.

DEMO (Demonstration) mode

When the AC cord is connected for the first time, the display
window demonstrates the functio;is of the unit. When the power
is turned on, the DEMO display is overridden by the operation
display. When the power is turned off, the DEMO mode is

restored.

To cancel DEMO mode

Press the DEMO button. To reenter, press again.

Illumination guides

Whenever the AC cord is connected or one of the function buttons
is pressed, the buttons for that operation light up or flash.
Example: When the AC cord is connected, the

II

SET button

flashes as a guide to setting the current time.

Flash windows

The windows on the top of the unit and the cassette decks light
up or flash while the unit is being powered on.
To turn off the light of the top window, press the ■ button while
pressing the CD button. To turn back on, repeat the above.
To turn off the light of the cassette decks, press the ■ button
while pressing the TAPE button. To turn back on, repeat the
above.

After use

Press the POWER button to turn off the power. The display

changes to the clock.

ENGLISH