Aiwa CD-DW420 U - Manual (Page 18)

1
POWER
<& STANDBY RADIO
TAPE —»i»— CD
iWI —
PLAYING BACK A TAPE
• The unit plays back the side facing the cassette holder.
• Use only Type I (normal) tapes.
1 Set the FUNCTION switch to TAPE/POWER
6STANDBY.
2 Insert a cassette.
® Press the ■/±STOP/EJECT button to open the cassette
holder.
® Insert a cassette.
® The side to be played back
@ Press the cassette holder lightly to close it.
3 Press the ^PLAY button to start playback.
Basic operation
Press the following buttons.
To stop ■/£STOP/EJECT button
To fast forward ►►FF button
To rewind ◄◄REW button
To pause II PAUSE button
Press again to resume playback.
Continuous piayback
You can play back deck 1 and deck 2 continuously.
Deck 2 is played back first and deck 1 is played back next.
1 Insert the cassette to be played first into deck 2.
2 Insert the cassette to be played next into deck 1.
3 Set the FUNCTION switch to TAPE/POWER6STANDBY.
4 Press the ►PLAY button of deck 2. Playback starts in deck
2
.
5 Press the II PAUSE button and ►PLAY button of deck 1.
When the playback of deck 2 ends, the II PAUSE button of deck
1 is released and play starts on deck 1.
Cassette tapes
Tape slack □
Take up any slack in tape with a pencil or similar tool before use.
Slack tape may break or jam in the mechanism.
120-minute or longer tapes
These are extremely thin and easily deformed or damaged. They
are not recommended.
To prevent accidental erasure □
Break off the plastic tabs on the cassette tape after recording,
with a screwdriver or other pointed tool.
@ Side A
® Tab for side A
To record on a cassette without the tabs'
Cover the tab openings with cellophane tape.
© Cellophane tape
Q
18