Aiwa CX-NMT50 - Manual (Page 15)

DUBBING A TAPE MANUALLY DUBBING THE WHOLE TAPE
1 ,
O
;z
Q
ir
o
IJ
lU
ir
• Set the tape to the point where recording wili start.
• The reverse mode is automaticaiiy set to Z.
Note that recording wiii be done on one side of the tape oniy.
1 Press the TAPE button.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
insert the tapes with the sides to be piayed back or recorded
on facing out from the unit.
3 Press the TAPE/DECK 1/2 button to select
deck 1.
“TP 1” is dispiayed.
4 Press the # REC/REC MUTE button to start
recording.
Playing and recording start simultaneously.
To stop dubbing
Press the ■ button.
This function allows you to make exact copies of both sides of
the original tape. The reverse side of both tapes will start
simultaneously as soon as the longer tape has been reversed.
• Dubbing does not start from a point halfway in the tape.
• The reverse mode is automatically set to H).
1 Press the TAPE button.
2 insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded
on first facing out from the unit.
3 Press the SYNCHRO DUBBING button once or
twice to start recording.
® For recording at normal speed, press it once to display
NORM-DUB.
® For recording at high speed, press it twice to display
HIGH-DUB.
ilSCpt ; f"; ft T:
i » iJ n ; : ■ ..¡J
63
- ' - . . . 63=
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press the ■ button.
Recording does not start, if the erasure prevention tab on either
side of the tape is broken off.
ENGLISH
14