Aiwa CX-NMT50 - Manual (Page 11)

RANDOM /REPEAT PLAY
Use the remote control.
RANDOM play
All the tracks on the selected disc or on all the discs can be
played randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press the RANDOM/REPEAT button.
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display.
REPEAT play — c;. lights up on the display.
RANDOM/REPEAT play — RANDOM and Ci. light up on the
display.
Cancel — RANDOM and ci. go out from the display.
To play all discs, press the button to start play.
To play a single disc, press the DISC DIRECT PLAY button,
then press one of the numbered buttons (1-3) within 3 seconds
to start play.
3 Press the numbered buttons and the +10 button
to program a track.
Example:
To select the 25th track, press the +10, +10 and 5 buttons.
To select the 10th track, press the +10 and 0 buttons.
Program number
Total playing time of
the selected tracks
O
■■■; i.............. n
::: ■ l .^
Selected track number Total number of
selected tracks
O
:z
!
3.
a
o
4 Repeat steps 2 and 3 to program other tracks.
5 Press the button to start play.
To check the program
Each time the ◄◄ or ►► button is pressed in stop mode, a
disc number, track number, and program number will be
displayed.
During random play, the following operations are not possible:
-to select the tracks directly with the numbered buttons.
-to skip to the previously played track with the ◄◄ button.
To clear the program
Press the ■ CLEAR button in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
PROGRAMMED PLAY
Up to 30 tracks can be programmed from any of the inserted
discs.
1
2,3
Use the remote control.
1 Press the PRGM button twice in stop mode.
The PRGM indicator lights up on the display.
PRGM
»OCK OiiSCO
UJ
: ■■ ! : ■ :
u- u u
• When the PRGM button is pressed once in step 1, the unit
enters the KARAOKE PROGRAM (see page 20).
Press the DISC DIRECT PLAY button, then press
one of the numbered buttons 1 to 3 within 3
seconds to select a disc.
The selected disc is indicated in red on the display.
Go to the next step when the tray stops rotating.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press the RANDOM/REPEAT
button repeatedly until c^. appears on the display.
During programmed play, you cannot perform random play, check
the remaining time, and select a disc or track.
ENGLISH
1 0