Dsp surround system, To cancei the seiected mode, Using the headphones – Aiwa CX-NA71 User Manual
Page 9: Sound adjustment during recording, When the music source is monaural, To cancel the selected mode, Graphic equalizer dsp surround system
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
GRAPHIC EQUALIZER
DSP SURROUND SYSTEM
GEQ
'''iH '
'-------------- i
GEQ-S
This unit provides the foilowing three different equaiization curves.
ROCK:
Powerfui sound emphasizing trebie and bass
POP:
More presence in the vocais and midrange
CLASSIC:
Enriched sound with heavy bass and fine treble
Press the GEQ button repeatedly until the desired
equalization curve is dispiayed.
ROCK /POP / CLASSIC
, _ „ „^^
1
^^..,.......... .. ........ ,
- ................... -
To cancei the seiected mode
Press the GEQ button repeatedly so that GEQ QFF appears on
the display.
SURROUND
CO
z
o
< o
Q. (/}
LU
QC
Q.
v'""""".
The DSP (Digital Signal Processor) surround system can recreate
the effect of sounds reflected from walls or ceilings. This system
enhances 3 types of sound presence.
DISCO:
Sound presence of a disco
LIVE:
Sound presence of a live music performance
HALL:
Sound presence of a concert hall
Press the SURROUND button repeatedly until the desired
SURROUND mode is displayed.
DISCO/LIVE/HALL
6-’
■1
Equalization curves are selected automatically to match the
SURROUND modes and can also be selected or turned off to
suit your preference.
Using the headphones
Connect headphones to the PHONES jack with a stereo standard
plug (
06.3
mm, '/4
inch).
No sound is output from the speakers while the headphones are
plugged in.
Sound adjustment during recording
The output volume and tone (except BBE) of the speakers or
headphones may be freely varied without affecting the level of
the recording.
When playing back a tape recorded with BBE, it is recommended
that BBE be set to off to avoid distorted high frequency sound.
When the music source is monaural
Select LIVE to obtain a simulated stereo effect. When DISCQ or
HALL is selected, no sound will be heard from the surround
speakers.
To cancel the selected mode
Press the SURRQUND button repeatedly so that SUR QFF
appears on the display.
While SURRQUND mode is off, no sound is heard from the
surround speakers.
When the MIC or ECHO level is changed (page 19), the
SURROUND mode is automatically canceled.
ENGLISH