Dubbing a tape manually, Dubbing the whole tape, To stop dubbing – Aiwa CX-NA71 User Manual
Page 17: Dubbing a tape manually dubbing the whole tape
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DUBBING A TAPE MANUALLY
DUBBING THE WHOLE TAPE
i—■ (--
■ -----
o
__ ....... ............. j[_ Jl
i
■ ■ !'
■ ¡¡ft
iLJil
itjm
o
9
■ ' “ ii
1
o
9
iCx
C
‘
0
___ _ .Ji
C5
z
Q
tr
O
u
UJ
tr.
• Set the tape to the point where recording wiii start.
• The reverse mode is automaticaiiy set to !I.
Note that recording wiii be done on one side of the tape only.
1
Press the TAPE button.
2
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded
on facing out from the unit.
3
Press the DOLBY NR button to turn off the Doiby
NR.
□□ NR on the display goes out.
4
Press the TAPE/DECK 1/2 button to seiect
deck 1.
“TP 1” is displayed.
5 Press the # REC/REC MUTE button to start
recording.
Playing and recording start simultaneously.
To stop dubbing
Press the ■ button.
To set the Dolby NR when playing back the dubbed tape
Press the DOLBY NR button and turn Dolby NR on or off to
match the original tape.
This function allows you to make exact copies of both sides of
the original tape. The reverse side of both tapes will start
simultaneously as soon as the longer tape has been reversed.
• Dubbing does not start from a point halfway in the tape.
• The reverse mode is automatically set to ID.
• The Dolby NR does not affect recording.
1
Press the TAPE button.
2
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded
on first facing out from the unit.
3
Press the SYNC DUB button once or twice to start
recording.
® For recording at normal speed,
press it once to display
NORM-DUB.
@ For recording at high speed,
press it twice to display
HIGH-DUB.
®
№.
@
tfi.
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press the ■ button.
To set the Dolby NR when playing back the dubbed tape
Press the DOLBY NR button and turn Dolby NR on or off to
match the original tape.
Recording does not start, if the erasure prevention tab on either
side of the tape is broken off.
ENGLISH
16