Canon B820 - Manual (Page 79)

8-2
USER SETTINGS
Name Description Settings
DATE & TIME Set the date and time (24-hour clock) using the numeric
buttons. –
UNIT TELEPHONE # Enter your fax number using the numeric buttons. –
UNIT NAME This is the name that appears at the top of each fax page you
send (see p. 2-8). –
TX TERMINAL ID This option sets the parameters for the identification header
that appears on every page you send. ON/OFF
TTI POSITION Select the position of the TTI. INSIDE IMAGE/
OUTSIDE IMAGE
FAX/TEL TELEPHONE # MARK Select the icon for the fax number.
SCAN CONTRAST Set the density of the reproduction. STANDARD/
DARKER/ LIGHTER
OFFHOOK ALARM Enable/disable the off hook alarm. The alarm alerts you that
the handset is not seated properly in its cradle. ON/OFF
VOLUME CONTROL Set the volume of the fax sounds. –
LINE MONITOR VOL Set the volume of the line monitor (sound during dialing). 0 (off)/1/2/3
ALARM VOLUME Set the volume of the error alarm sound. 0 (off)/1/2/3
KEYPAD VOLUME Set the volume of the keypad. 0 (off)/1/2/3
RX CALL LEVEL Set the ring tone. STANDARD/HIGH
TEL LINE TYPE Set the dialing method the fax uses to match the type of phone
line you have. TOUCH TONE/
ROTARY PULSE
R-KEY SETTING Set the type of connection for your fax. PSTN/PBX
PSTN Your fax is connected to an outside line. –
PBX ACCESS TYPE: Set the access line type for the PBX. PREFIX/HOOKING
ACCESS NUMBER: If you select PREFIX, you can enter an
outside line number of up to 19 digits. –
AUTO VOICE DIAL Enable/disable automatic dialing for UCanTalk. ON/OFF