Canon B820 - Manual (Page 59)

6-6
* Exclude UCanTalk.
Setting CALLER ID
If the CALLER ID setting is set to ON, the caller’s name and phone/fax number appear on the
LCD when you receive a call. You can also set the fax to reject unwanted calls (FAX-B840
only).
1 Press [Function].
Press [Polling].
Press [Start/Copy].
2 Dial the fax number of the fax machine you wish to poll.
Use one of the dialing methods* described on page 5-2.
3 Press [Start/Copy].
Your fax begins receiving the document.
• CALLER ID is only available in some countries.
• To use this feature, you will need to subscribe for a Caller ID service (only available in some
countries). The Caller ID feature uses the ETSI EN 300 778-1 protocol. Contact your local
telephone company for detailed information on this service.
1 Press [Function].
Press [Start/Copy].
2 Use [ ] or [ ] to select CALLER ID.
Press [Start/Copy].
• To disable Caller ID feature, use [ ] or [ ] to select OFF, then press [Start/Copy]. Press [Stop] to
return to standby mode.
• To enable Caller ID feature, use [ ] or [ ] to select ON and continue with the steps below.
3 Press [Start/Copy].
TEL= 3456xxxx
OFF