4 rx settings printer settings – Canon B820 User Manual
Page 81
8-4
RX SETTINGS
PRINTER SETTINGS
Name
Description
Settings
ECM RX
Enable/disable error correction during reception.
ON/OFF
FAX/TEL AUTO SW
This feature is used to answer calls, and if no fax tone is
detected, the fax rings to alert you of an incoming call.
–
RING START TIME
Set the duration that the fax listens for a fax tone before
starting to ring.
0 to 30 seconds
F/T RING TIME
Set the length of time the fax will ring to alert you of an
incoming call.
10 to 60 seconds
DEFAULT ACTION
Select the action taken after the F/T RING TIME expires.
DISCONNECT/
RECEIVE
INCOMING RING
Set the fax to ring when it receives a call.
ON/OFF
RING COUNT
Set the number of incoming rings before the fax answers.
1 to 99 times
MAN/AUTO SWITCH
Determine if the fax switches to document receive mode after
the fax rings for a specified time when the fax is in the manual
receive mode.
ON/OFF
RING TIME
Set the amount of time the fax will ring before switching to
document receive mode.
1 to 99 seconds
REMOTE RX
Enable/disable remote receiving.
ON/OFF
REMOTE RX ID
If you set REMOTE RX to ON, you can select the remote
receiving ID.
00 to 99
MEMORY RX
Turn on/off memory receiving of a document.
ON/OFF
Name
Description
Settings
RX REDUCTION
Enable/disable reduction for received documents.
ON/OFF
FIXED REDUCTION
Select the reduction rate.
STANDARD/
A4
→LTR/
LGL
→LTR
REDUCE DIMENSION
Select reduction in height only or both width and height.
VERTICAL ONLY/
HORIZ & VERTICAL
PAPER SIZE
Select the size of the loaded fax paper.
A4/LGL/LTR