beautypg.com

Sending methods, Dialing methods, Sending documents – Canon B820 User Manual

Page 40: Direct sending, Sending methods -2 dialing methods -2, Sending documents -2, Direct sending -2

background image

5-2

Sending methods_______________________________

Direct sending (see below)
Memory sending (see p. 5-3)
Manual sending (see p. 5-4)

Dialing methods ________________________________

There are several methods of dialing the receiving party’s number, depending on how your fax is
set up.

Regular dialing
One-touch speed dialing (see p. 5-5)
Coded speed dialing (see p. 5-5)
Directory dialing (see p. 5-6)
UCanTalk (see p. 5-7)

Sending documents

Direct sending__________________________________

1

Load the document face up into the document tray.

See Loading documents, p. 3-2.
You can set the scanning resolution and contrast (see p. 5-1).

2

Dial the receiving party’s fax number.

Use one of the dialing methods described in this chapter.

3

Press [Start/Copy] twice.

The fax begins sending.

TEL=

3456xxxx

• If an error occurs during sending, the fax beeps intermittently for a few seconds and an error

message appears on the LCD. If this happens, correct the error and then press [Stop], then try
sending the document again. See LCD messages, p. 9-14.

• The fax automatically redials if the receiving party does not answer or if the line is busy. (You

can specify the number of times it redials; see AUTO REDIAL, p. 8-3.)

This manual is related to the following products: