Canon B820 - Manual (Page 41)

5-3
SE
ND
I
N
G
D
O
C
U
ME
NT
S
5
Memory sending________________________________
The fax normally uses direct sending to send your document. However, you can send it with
memory sending (see below). In this case, the fax quickly scans the document into memory.
Then it sends the document from memory. This means you do not have to wait for the fax to
finish sending before you can retrieve your original document.
You can send up to 15 A4-size (5 legal-size) pages at a time with memory sending (based on the
Canon FAX Standard Chart No.1, standard resolution).
* Exclude UCanTalk.
If MEMORY FULL appears on the LCD during the scanning process, re-start sending the
document using direct sending (see p. 5-2), or divide the document into sections.
1 Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and contrast (see p. 5-1).
2 Press [Function].
Press [Send Options].
3 Use [ ] or [ ] to select MEMORY TX.
Press [Start/Copy].
4 Dial the receiving party’s fax number.
Use one of the dialing methods* described in this chapter (see p. 5-2).
5 Press [Start/Copy] twice.
The fax scans the document into memory and begins sending.
TEL= 3456xxxx