Preliminary steps, Getting ready to sew – SINGER 9100 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Electrical Connections
power and Light Switch
2.Getting Ready to Sew
preliminary steps
CONNECTING MACHINE
Before plugging in your machine, be sure that
the electrical information on the motor bracket
conforms to your electrical power suppy.
To connect the machine, insert the power line
plug into your electrical outlet.
OPERATING MACHINE AND
CONTROLLER
To
turn
on
both
machine
and
sewing
light,
press the switch located at top of light.
CAUTION:
recommend that you turn off
the
power
and
fight
switch
before
changing
needles and presser feet, removing needle plate,
and when leaving the machine unattended. This
eliminates
the
possibility
of
starting
the
ma
chine
by
accidentally
pushing
the
speed
con
troller.
To
run
the
machine,
press
the
speed
con
troller.
The
harder
you
press,
the
faster
the
machine will sew.
To
stop
the
machine
from
sewing,
remove
pressure from speed controller.
— 4—