Adjusting selectors for your fabric, Adjusting selectors for your, Fabric – SINGER 9100 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
adjusting selectors
for your fabric
SETTING STITCH LENGTH
The stitch length selector regulates the length
of both straight and zig zag stitches. The num
bers at the right of the lever represent the
number of stitches per inch: the higher the
number, the shorter the stitch. The numbers
at the left of the lever represent stitch length
in millimetres : the higher the number, the
longer
the
sf/fc/t.Generally.
shorter
stitches
are best for lightweight fabric: longer ones for
heavy fabric.
Setting Stitch Length
Tighten
Setting Selector
1. Loosen thumb nut by turning to left.
2. Position lever tor desired stitch length.
3. Tighten thumb nut by turning to right.
For reverse stitching, simply raise the selector
lever as far as it will go. Do not loosen thumb
nut to reverse.
I
To Reverse
Stitching
— 13—