Caring for your machine, Cleaning and lubricating – SINGER 9100 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6.Caring for Your Machine
cleaning and lubricating
Your machine will serve you perfectly tor many
years if you keep it clean and lubricated. How
often you will need to clean and lubricate the
machine will depend on how often you use it.
CAUTION;Before
cleaning
and
lubricating
the
machine,
disconnect
the
power-line
plug
from
electrical supply.
EVERY WEEK OR SO.
Remove lint or fluff from exposed parts. With
a soft cloth, clean:
• Tension discs, presser bar and needle bar
• Take-up lever and thread guides
• Bobbin case, needle plate and slide plate
• Machine surface (If necessary, dampen the
cloth and use a mild soap)
Remove
needle
plate
by
removing
screws
fastening it to machine bed and remove shuttle
as instructed on page 40.
Using a brush, clean:
• Feed
• Shuttle area
After cleaning, apply a drop of SINGER oil at
points indicated at right and on pages 40
and 4 1.
Clean ■
Clean-
Clean (between Tension
D
iscs
)
— 39—