SINGER 9100 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FLAT-FELLED SEAMS
Flat-Felled Seams
• Needle Position: Centre
• Stitch Width: 2 or 3
• Stitch Length: 1 5 to 20, depending on fabric
Zig-Zag stitching gives strength and durability
to flat tened seams.
1. Stitch the seam on the right side of the
fabric, taking full seam allowance.
2. Press seam allowance to one side, keeping
the right side of the stitch on top.
3. Trim the under-seam allowance to one-half
its width.
4. Turn the upper-seam allowance edge evenly
over the trimmed edge and top stitch.
—26 —
This manual is related to the following products: