SINGER 9100 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEAM FINISHES
• Needle Position: Centre
• Stitch Width: 4 or 5
• Stitch Length: 8 to 20, depending on fabric
Seam edges support the garment and should
be given a durable finish if the fabric is likely
to ravel.
1. Adjust stitch width and stitch length settings
to suit the fabric. Choose the settings that
will give you the most "open” stitch that will
secure the fabric edges; avoid harsh, over
stitched edges.
2. Trim seam edges evenly.
3.
Place stitching near the edge of the seam
allowance or over the raw edge as illustrated.
4.
If stitching is placed near the edge of the
seam
allowance,
trim
away
excess
fabric
after stitching.
Seam Finishes
— 27—