SINGER 9100 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Side stitching
Reset stitch width selector to 3 and stitch,
stopping at point E
Buttonholes (Continued)
Side Stitching
Final bar tack
With needle in fabric, set stitch width selector
at 5 and take approximately 6 stitches ending
at point F
Fastening stitch
With needle in fabric, set stitch width selector
at 0. and take approximately 3 stitches.
Remove work, draw threads to underside, fasten
and trim. Cut opening for button with sharp
scissors.
ID
Final Bar Tack
Fastening Stitch
0
==t
— 31 —
This manual is related to the following products: