SINGER 9100 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replacing Elastic
Replacing Elastic
When replacing elastic, use the same settings
as (or "Mending a Tear "
1
. Fit elastic for desired snugness at waistline,
allowing one inch for lOining. Lap the ends
and join with zig zag stitching
2.
Divide elastic band and garment waistline
into quarters. Lap elastic over fabric and pin
the two together at these intervals. Place
pins at right angles to stitching line
3. Take a few stitches to anchor elastic to
fabric, then hold the elastic taut as you stitch
so that
It
will remain stretchable after stitch
ing
IS
completed.
Bar-Tacked Belt Loops
T-
Bar Tacks
Bar tacks, to repair lingerie and attach belt
loops, are made with the zig-zag stitch at a
closed stitch length.
— 34—