To terminate the call, Use force call, To enable call forcing for headset users – Nortel Networks 2007 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To terminate the call
Agent features
InCalls
2498
NotReady
Choose one of the following:
— Press the Goodbye key.
— Tap the Incalls soft key.
— Tap the individual DN line soft key
(to be removed from the queue).
— Tap the NotReady soft key (to be
removed from the queue, but to
remain logged in as an agent
position) or wait for the caller to
terminate the call.
Use Force Call
Use the Force Call feature to automatically connect to an incoming ACD
call. A time interval is set by the system administrator between each
incoming call.
When calls come in, a short tone indicates the new call. The InCall soft
key changes color, and the ACD call automatically goes to the agent
position. Pressing the Incalls key while call forcing (Auto Answer) is
active disconnects an active ACD call.
To enable call forcing for headset users
1. Log in.
2. Replace the handset.