Oiling the machine – Sears 385.4052LX200 User Manual

Page 74

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Oiling the Machine

Oil behind the face cover

Unplug the machine.

Take the face plate off the sewing machine by removing

the setscrew.

Open the face cover and oil the three points, as shown, at

least once a year.

One or two drops of oil is sufficient. Remove excess oil,

otherwise it may stain the fabric. In case the machine has not

been used for a long time period, oil it before sewing.

Use quality sewing machine oil.

Oil the shuttle area

Open the shuttle cover by pulling down the embossed part on

the left side of the cover.

Oil the point as indicated in the illustration.