Canon DR-5060F - Manual (Page 79)

77
Dail
y Cleaning
5
Daily Cleaning
Cleaning the Scanning Glasses and Rollers
A probable cause of stripes appearing in scanned images or dirt appearing on
scanned documents is dirt on the scanning glasses or rollers. Clean scanning
glasses and rollers regularly.
1
Turn the power switch OFF, and unplug the power cord from the
power outlet.
2
Remove the removable tray or document eject support plate on
the document eject tray if it is installed. Close the document eject
tray extension if it is open.
3
Lift up the upper unit.
Backup FILM E F
A Feeding Option
New File
Space
Count Only
Manual Auto Semi-Auto
Scanner
4
Use a clean, dry, soft cloth to wipe the scanning glasses.
Two scanning glasses are located on the inside of the upper unit. Wipe both of
these scanning glasses clean.
CAUTION
Never spray mild detergent or water directly on the scanning glasses. The spray
could penetrate below the glass, and contaminate the internal light source and
lenses.
Scanning glasses