Canon DR-5060F - Manual (Page 53)

51
Preparing Documents
3
Setting Scan Conditions
3
If the scanner is in the Backup mode or Scanner Only mode,
initiate scanning from your application.
MEMO
Details of scan conditions are set on the application. For details, refer to the
separate “ISIS/TWAIN Driver Instructions” or “Scanning Utility 5060
Instructions.”
4
Load one sheet on the document tray face up with its top edge
inserted into the scanner.
The document is scanned.
5
Insert the document one page at a time.
6
To end scanning, press the Stop key.
MEMO
When scanning ends the document tray remains at the raised position. To
return the document tray to its original position, press the Feeding Option key
and then select any key other than [Manual].