Canon DR-5060F - Manual (Page 60)

58 Setting Scan Conditions
■ How to Set the User mode
A
Scanner
1
Hold down [A] key for at least five seconds.
The [A] key blinks, and the user mode appears on the counter display.
2
Select the user mode using the or key.
3
Press the [A] key to select the mode (last number) to be used.
4
Press the Clear/Stop key.
This sets the selected mode, and returns the counter display to the counter
display.
A
Scanner
1
Hold down [A] key for at least five seconds.
The [A] key blinks, and the user mode appears on the counter display.
2
Select the user mode address using the or key.
For setup items U11 to U14, “-” is displayed at the end of the address.
3
Press the [A] key to display the setting value.
4
Change the setting value using the or key.
5
Press the [A] key to redisplay the user mode.
6
Press the Clear/Stop key.
This sets the selected mode, and returns the counter display to the counter
display.