Canon DR-5060F - Manual (Page 26)

24 Connecting to a Computer
Connecting the Power Cord and Ground Cable
Connect the power cord and ground cable.
Be sure to use only the power cord and ground cable provided with the scanner.
■ Connecting the power cord
Connect the power cord to the rear of the scanner, and insert the power plug into
the power outlet.
WARNING
When connecting the power cord, follow these precautions. Failure to do so might
cause fire or electrical shock.
● Never grasp the plug when your hands are wet.
● Never plug the unit into a multi-plug power strip.
● Never bundle or tie the power cord around itself or another object. Connect
the plug securely to the power source.
● Use only the power cord and plug provided with the scanner.
● Before you connect the power cord, be sure to turn the power switch OFF.
● Be sure to connect to an AC 120 V (240 V in Europe) (50/60 Hz) power
supply.
● Do not plug the scanner into an outlet shared with another device. If you use
an extension cable, pay attention to the total amperage of the cable.