Canon DR-5060F - Manual (Page 38)

36 Preparing for Paper Feeding and Ejection
■ Removable tray
Attach this tray when you are scanning small-size documents.
This tray prevents documents from flying out of the tray when they are ejected
from the scanner.
MEMO
The removable tray is held in place on the document eject tray extension by
magnets. Close the document eject tray extension when the removable tray is
in use.
1
Install the removable tray on the center of the eject tray, and adjust
the width by the left and right guides.
Paper Feed Adjustment
Use the paper feed adjustment lever to adjust paper feed in the following
instances:
– when feed errors occur due to friction when scanning documents with a
slippery surface
– when scanning thin documents
The paper feed adjustment lever can be adjusted to three positions.
The normal setting is the left (I) position. If the paper is slightly slippery, adjust it to
the center (II) position and to the right (III) position if it is more slippery. If you are
scanning thin documents of standard sizes A4 or LTR etc. scan the document with
the lever at the center (II) position. If you are scanning thin documents smaller
than standard size, scan the document with the lever to the right (III) position.