Canon DR-5060F - Manual (Page 7)

5
Safety Precautions
Daily maintenance
When you are working around the unit, follow these precautions to avoid the
hazards of fire and electrical shock:
WARNING
■ Never install and operate the unit near flammable substances such as
alcohol, benzene, paint thinner, or any other type of volatile solution.
■ Never damage or modify the power cord, place heavy objects on the power
cord, or pull or unnecessarily bend the power cord.
■ Always make sure that your hands are dry when you are handling the power
cord or plug. Never grasp the plug when your hands are wet.
■ Never plug the unit into a multi-plug power strip.
■ Never bundle, wrap, or tie the power cord around itself or another object.
Connect the plug securely to the power source.
■ Use only the power cord and plug provided with the scanner.
■ Be sure to connect the ground cable before using the scanner.
Also, never connect the ground cable to gas pipes or water pipes. Doing so
might cause fire.
■ Never attempt to disassemble or modify the unit.
■ Never use any type of flammable spray near the unit.
■ Before you clean the unit, turn the power OFF and disconnect the power
cord from the power outlet.
■ To clean the unit exterior, use a firmly wrung cloth moistened slightly with
water or mild detergent. Never use any type of volatile solution such as
alcohol, benzene or paint thinner.
■ If you hear a strange sound, detect smoke or abnormal heat, sense
vibration, or smell odd odors around the unit, turn the power switch OFF
immediately and disconnect the power cord from the outlet. Call for service
immediately.
■ Handle the unit with care. Avoid shocks and vibrations to the unit caused by
reckless handling. If you suspect the unit has been accidentally damaged,
turn the power switch OFF immediately, disconnect the power cord from the
outlet, and call for service.
■ Before you move the unit, always turn the power OFF and disconnect the
power cord from the power outlet.
Safety Precautions