Winco DPG-2145-001 - Manual (Page 31)

Manual 36526F DPG-21XX-00X Digital Controllers
Woodward 23
Universal PST Menu Items
Use the File menu to:

Open a previously saved setup data file

Save setup data to a file

Send setup data to the default printer

Exit the program
Use the View menu to:

Select Parameter Table view (Table
View)

Select Chart Recorder view (Chart
View)
Use the Port menu to:
 Select the PC’s serial port that is
connected to the DPG-2000
Use the Help menu to access:

Help on the Universal PST for DPG

Help on the DPG-2000 product that is
currently in communication with the PC

Information about the Universal PST for
DPG application
Parameter Setup
The Parameter Setup panel displays a table where each row shows the Name of a
user programmable parameter, its current Value, and the parameter’s Default,
Minimum, and Maximum values.
To modify a parameter’s current value, it must first be selected. Do this by double-
clicking the left mouse button on a cell in the table that is at the intersection of the
parameter’s row and the Value column. The selected cell will be highlighted and
the value can now be modified. When done modifying the value, press the
c
omputer keyboard’s key to transmit the new value to the controller.
In the figure shown below, the Set Speed A value has been selected for editing.