Tuffy Security 278 - Manual (Page 2)

Page 2 of 5 – Rev 042414
Figure 2
Instructions for changing the combination
Attention: The combination pushbutton lock is typically shipped from the factory with either no code entered yet
or “12345” and will need to be reset by the customer. Alternative pre-programmed code is ________________
2. Selecting your combination
2.1. Please look at the front of the combination lock. There are buttons numbered 1 through 0. There is also an
OPEN lever and a CLEAR button. (See Figure 3)
2.2. Select your own combination and keep the combination in a safe place.
2.3. For best results, select between four and seven numbers in your combination. Each number can only be used
one time. Do not use number combinations that can be easily guessed.
Figure 3