Tuffy Security 238 - Manual (Page 2)

Tuffy Security Products, www.tuffyproducts.com , (970) 564-1762 Page 2 of 2 - 12/1/2009
FIGURE 2
OPTIONAL MOUNTING METHOD:
As an alternative mounting option there are additional nuts and washers included in the shipping package to allow the bolts to remain
in the vehicle while the trunk can be temporarily removed.
1. Install (4) #9.3 Bolts and (4) #9.2 Washers up from underneath. Fasten the #9.3 Bolts to the floor with (4) #9.1 Nuts and (4) #9.2
Washers. (See Figure 3)
2. Place the trunk back in the vehicle over the bolts fastened to the floor. Secure the trunk down to the #9.3 Bolts using (4) #9.1
Nuts and (4) #9.2 Washers. (See Figure 3)
FIGURE 3
ATTENTION:
FREQUENT LUBRICATION IS NECESSARY ON THE LOCKING SYSTEM
The pushbutton lock contains an “O” ring seal to protect the interior from dust and water. If this mechanism is not
lubricated regularly it will become difficult to operate and it may not return to its home position preventing the key from
operating the lock. If this happens simply pull up on the pushbutton to manually bring it back to its home position.
Lubricate the pushbutton with a light lubricant such as silicone spray. The pushbutton may have to be periodically
disassembled and cleaned.
Call (970) 564-1762 for Technical Support