TeeJet GuideLine SmartPad II - Manual (Page 91)

SmartPad II
Software Version 4.02
Chapter 3 - Real-Time Guidance 3-37
Lightbar Setup
Hazard Range
The Hazard Range menu item is the distance prior to an impending Hazard the operator wants to be notified. This dis-
tance value is set for Hazard detection only. A distance of 100 ft. (30 m) is the minimum setting for this menu item.
This menu item should be used in conjunction with the Alarm menu item found on page 3-35.
To change the Hazard Range setting; highlight the Hazard Range menu item and press . The Hazard Range dialog
box will appear. Enter the desired distance in feet (meters) using the arrow keys, , once the desired dis-
tance is entered, press to return back to the Lightbar setup menu, see Figure 3-47.
Figure 3-47: The Hazard Range Menu Item