TeeJet GuideLine SmartPad II - Manual (Page 37)

Fieldware for Smartpad II
Software Version 4.02
Chapter 2 - Software Overview 2-15
Communications Setup
Port Parity
The Parity menu item sets the GPS port Parity on the SmartPad II, see Table 2-4.
To change the Parity setting; highlight the Parity menu item and press . The Port Parity dialog box will appear.
Select the desired setting using the arrow keys , once the desired setting is selected, press to return back to
the Communications setup menu, see Figure 2-15.
Figure 2-15: The Port Parity Menu Item
Setting Description
None Sets the SmartPad II GPS serial port parity to None. This is the default setting.
Odd Sets the SmartPad II GPS serial port parity to Odd.
Even Sets the SmartPad II GPS serial port parity to Even.
Table 2-4: The Port Parity Menu Item Settings