TeeJet GuideLine SmartPad II - Manual (Page 80)

3-26 Chapter 3 - Real-Time Guidance
Lightbar Setup
SmartPad II
Software Version 4.02
Use Lightbar
Allows the user to turn the lightbar on or off.
To change the Use Lightbar setting; highlight the Use Lightbar menu item and press . The Use Lightbar dialog
box will appear. Select the desired setting using the arrow keys , once the setting is selected, press to
return back to the Lightbar setup menu, see Figure 3-33.
Figure 4-33: Setup Lightbar Use Lightbar?
Setting Description
No The lightbar will not be used while Guidance is running. The lightbar will not
be required to run Guidance.
Yes The lightbar will be used, and will be required while the Guidance program is
running.
Table 4-10: Use Lightbar Settings