TeeJet GuideLine SmartPad II - Manual (Page 192)

5-20 Chapter 5 - Field Mapping
Mapper Application Modes
Fieldware for Smartpad II
Software Version 4.02
Mapper Application Modes
The Mapper application provides the operator with multiple mapping options as well as real-time application infor-
mation. The operator can select between four different mapping modes Figure 5-23. Each mode can be selected in the
real-time screen and the operator has the option of switching from one mode to the next On The Go! The real-time
screen will show all the mapper modes in Figure 5-24 below. Once a mode is selected the operator will be prompted
for more information such as interior or exterior, and feature name. Each mode will be explained in further details in
the next sections.
Figure 5-23: Mapper mode Buttons
Figure 5-24: Real-Time Mapper Mode Selection