beautypg.com

Lightbar – TeeJet CenterLine v1.05 User Manual

Page 34

background image

CenterLine

Software Version 1.05

Diagnostic

Description

GPS Status

If the lightbar is not receiving GPS data, the text window message
appears as . If the lightbar is receiving GPS data but no
differentialy corrected GPS data, the text window message appears
as .

DGPS Status

If the lightbar is receiving differentialy corrected GPS data, the text
window message appears as .

NMEA Strings

Returns the name of each NMEA string currently being received from
the receiver. As an example if the NMEA GPGGA string is being
received from the receiver then the text window displays .

Data Rate

Returns the current receiver data rate. This is typically 5 Hz. The rate
is displayed in the text window, e.g. <5 HZ> is displayed for the 5
Hertz data rate.

Table 13: Receiver Diagnostic Messages

Lightbar

The Lightbar diagnostic test initiates an illumination sequence of all of the LEDs and the text win-
dow, followed by a brightness control sequence. This allows the verification that all lights on the
CenterLine lightbar are working properly.

To start the Lightbar check, go to and press Enter. Scroll with Up or Down until
is displayed in the text window and press Enter. The illumination sequence should
start. When test is completed the lightbar displays .

CenterLine
Tools

28