TeeJet CenterLine v1.05 - Manual (Page 24)

CenterLine
Software Version 1.05
Setting Description
OFF No Status Detect implemented. Default setting.
ON Status detect assumes a single swath centered on the vehi-
cle.
Table 3: Status Settings
Alarm
The setting, when set to ON, notifies the operator when entering a previously applied
area. The text window displays when the implement swath is in a previously applied
area of the field.
To set the Alarm setting, go to Guidance setup, scroll until is displayed in the text win-
dow, and press enter. Using Up or Down, scroll between the and settings until the
desired setting is displayed in the text window. Press Enter to save the setting and return to the
Guidance setup menu.
Figure 18: Setting the Alarm
Setting Description
Off No applied area detection.
On Applied area detection alarm.
Table 4: Status Detect Settings
CenterLine
CenterLine Setup 18