TeeJet CenterLine v1.05 - Manual (Page 11)

CenterLine
Software Version 1.05
Menu Items Next and To Start
There are two additional menu items that are found in almost every menu; and START>. Figure 3 shows the and menu items in the System Setup menu
list. Pressing Enter at brings up the next menu heading. As an example, pressing Enter
at , while in Lightbar setup, brings up . In the same example, pressing ESC at
brings up the menu Item. Selecting automatically goes back
to the menu. From here real-time guidance can be started. Using is useful
when it is necessary to quickly change one setting and then go right back into real-time operation.
Figure 3: Next and To Start Menu Items
Software Components
CenterLine software can be broken into three components: Setup (See —CenterLine Setup“ on
page 13), Real-Time (See —CenterLine Real-Time Operation“ on page 29), and Tools (See —Tools“
on page 27). Setup allows the configuring of the CenterLine to best suit the current needs, and the
Real-Time component handles all of the real-time guidance operations. The Tools component pro-
vides basic diagnostics for the lightbar and the attached GPS receiver.
CenterLine
Introduction
5