TeeJet 844-E Sprayer Control - Manual (Page 4)

iv
www.teejet.com
844-E Sprayer Control
Copyrights
© 2013 TeeJet Technologies. All rights reserved. No part of this document or the computer programs described in it may be reproduced, copied,
photocopied, translated, or reduced in any form or by any means, electronic or machine readable, recording or otherwise, without prior written
consent from TeeJet Technologies.
Trademarks
Unless otherwise noted, all other brand or product names are trademarks or registered trademarks of their respective companies or organizations.
Limitation of Liability
TEEJET TECHNOLOGIES PROVIDES THIS MATERIAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED.
NO COPYRIGHT LIABILITY OR PATENT IS ASSUMED. IN NO EVENT SHALL TEEJET TECHNOLOGIES BE LIABLE FOR ANY LOSS OF
BUSINESS, LOSS OF PROFIT, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS, OR FOR INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES OF ANY KIND, EVEN IF TEEJET TECHNOLOGIES HAS BEEN ADVISED OF SUCH DAMAGES ARISING FROM
TEEJET TECHNOLOGIES SOFTWARE.
ChaptEr 7 - Flow MEtEr Calibration 29
Method 1 – Known Volume ............................................................................................................................................................................29
Step 1 – Known Value .................................................................................................................................................................29
Step 2 – Programming Calibration Number .................................................................................................................................29
Step 3 – Resetting Volume Counter ............................................................................................................................................29
Step 4 – Spraying Known Volume ...............................................................................................................................................29
Step 5 – Entering in New Flow meter Calibration Number ..........................................................................................................29
Step 6 – Double-checking the New Value ...................................................................................................................................29
Method 2 – Known Tip Size Method ............................................................................................................................................................29
Step 1 – Check Tip Size ..............................................................................................................................................................29
Step 2 – Count Tips .....................................................................................................................................................................29
Step 3 – Calculated Flow .............................................................................................................................................................29
Step 4 – Measure ........................................................................................................................................................................30
Step 5 – Adjustments ...................................................................................................................................................................30