Firmware upgrade – StarTech.com SV1108IPPWEU User Manual
Page 78

Instruction Manual
71
Firmware Upgrade
As new versions of the SV1108IPEXT/POW firmware become available, they can
be downloaded from our website. Check the website regularly to find the latest
information and packages.
www.StarTech.com/Downloads
To upgrade the firmware, do the following:
1. Download the new firmware file to your computer.
2. Open your browser; log in to the SV1108IPEXT/POW; and click the Firmware icon to
bring up the Firmware File dialog box:
3. Click Browse; navigate to the directory that the new firmware file is in and select
the file.
4. Click Upgrade Firmware.
If Check Firmware Version is enabled (the default), when you perform an upgrade
the current firmware level is compared with that of the upgrade file. If the current
version is higher than the upgrade version, a message appears informing you of the
fact and the procedure stops.
NOTE: If you want to install an older firmware version, you must uncheck the Check
Firmware Version checkbox before clicking Upgrade Firmware.
5. After the upload completes, a message appears on the screen to inform you that
the operations succeeded. Click Logout at the bottom left of the Main web page.
6. In the screen that comes up click Yes to confirm that you want to exit and reset
the switch.
NOTE: You will need to wait a bit before logging back in.