StarTech.com SV1108IPPWEU - Manual (Page 77)

Instruction Manual
70
Set the parameters according to the information below.
Time Zone
To establish the time zone that the SV1108IPEXT/POW is located in, drop down the
Time Zone list and choose the city that most closely corresponds to where it is at.
If your country or region employs Daylight Saving Time (Summer Time), check the
corresponding checkbox.
Date
Select the month from the dropdown listbox.
Click < or > to move backward or forward by one year increments.
In the calendar, click on the day.
To set the time, key in the numbers using the 24 hour HH:MM:SS format.
Click Set to save your settings.
Network Time
To have the time automatically synchronized to a network time server, do
the following:
1. Check the Enable auto adjustment checkbox.
2. Drop down the time server list to select your preferred time server
or
Check the Preferred custom server IP checkbox, and key in the IP address of the
time server of your choice.
3. If you want to configure an alternate time server, check the Alternate time server
checkbox, and repeat step 2 for the alternate time server entries.
4. Key in your choice for the number of days between synchronization procedures.
5. If you want to synchronize immediately, click Adjust Time Now.
NOTE: After checking the Enable auto adjustment checkbox, you must click Adjust
Time Now or Set to save the change. Otherwise, the setting will be lost.
Maintenance
The Maintenance page allows the Administrator to upgrade the SV1108IPEXT/POW’s
firmware, and to backup and restore configuration settings / user profile information.