SilentKnight 5895XL 6A Intelligent Remote Power Supply - Manual (Page 5)

151142 1-1
Section 1
Overview
1.1 5895XL Description
The Model 5895XL Intelligent Power Module provides additional power and circuits to the
IntelliKnight 5820XL FACPs. The 5895XL can power all IntelliKnight compatible modules,
including SLC devices (via a Model 5815XL SLC Expander), remote annunciators (Model
5860); notification appliances, auxiliary power modules, and all other compatible modules.
Note: The 5808 does not use 5815XL SLC expanders.
The 5895XL has six Flexputs™ and two programmable relays. Outputs are rated 3.0 A (6.0 A
total for each 5895XL). Relays are Form C rated at 2.5 A @ 24 VDC. Outputs and relays are
fully programmable.
The 5895XL is optically isolated, providing ground loop isolation and transient protection. It
functions as an SBUS repeater which conditions the RS-485 signal and allows the module to
drive up to 6,000 feet of additional SBUS wiring.
The 5895XL is housed in a metal cabinet that is identical in size to the IntelliKnight 5820XL
FACP cabinet. This cabinet is large enough to house two 17 AH batteries. Like the 5820XL
cabinets, the 5895XL cabinet provides mounting studs for two Model 5815XL SLC Expander
modules.
The 5895XL communicates to the main IntelliKnight FACP via the SBUS. Each 5895XL
provides an additional 6,000 feet of SBUS wiring length to the main panel. As the drawings
on the next pages illustrate, this allows you to distribute modules, SLC devices, and outputs
throughout an extremely large facility.
As well as expanding the wiring length capabilities of IntelliKnight, the 5895XL also expands
IntelliKnight’s power capabilities by an additional 6.0 A of current.