Reznor R6GN Unit Installation Manual - Manual (Page 3)

3
IMPoRtaNt SaFEtY INFoRMatIoN
Please read all instructions before servicing this equipment.
Pay attention to all safety warnings and any other special
notes highlighted in the manual. Safety markings are used
frequently throughout this manual to designate a degree
or level of seriousness and should not be ignored.
WaRNING indicates a potentially hazardous situation
that if not avoided, could result in personal injury or death.
cautIoN indicates a potentially hazardous situation that
if not avoided, may result in minor or moderate injury or
property damage.
attENtIoN INStallERS: It is your responsibility
to know this product better than your customer. This
includes being able to install the product according to
strict safety guidelines and instructing the customer on
how to operate and maintain the equipment for the life of
the product. Safety should always be the deciding factor
when installing this product and using common sense
plays an important role as well. Pay attention to all safety
warnings and any other special notes highlighted in the
manual. Improper installation of the unit or failure to follow
safety warnings could result in serious injury, death, or
property damage. These instructions are primarily intended
to assist qualified individuals experienced in the proper
installation of this appliance. Some local codes require
licensed installation/service personnel for this type of
equipment. After completing the installation, return these
instructions to the customer’s package for future reference.
WaRNING:
Improper installation, service, adjustment,
or maintenance may cause explosion, fire,
electrical shock or other hazardous conditions
which may result in personal injury or property
damage. Unless otherwise noted in these
instructions, only factory authorized kits or
accessories may be used with this product.
WaRNING:
Do not place combustible material on or against
the unit cabinet. Do not place combustible
materials, including gasoline and any other
flammable vapors and liquids, in the vicinity
of the unit.
WaRNING:
PRoPoSItIoN 65 WaRNING: This product
contains fiberglass wool, a product known
to the state of California to cause cancer.
Disturbing the insulation of this product during
installation, maintenance, or repair will expose
you to fiberglass wool.
• Breathing this material may cause respiratory
irritations or may cause lung cancer.
• Fiberglass wool may also cause eye
irritation, skin sensitization, or other allergic
responses in susceptible individuals.
• Always wear goggles, disposable gloves,
long sleeved shirt, and appropriate breathing
protection when working near this insulation.
If contact with skin occurs, wash immediately
with soap and water. In case of contact with
eyes, flush immediately with water for at
least 15 minutes. Contact a physician if needed.
WaRNING:
The information listed below and must be
followed during the installation, service,
and operation of this unit. Unqualified
individuals should not attempt to interpret these
instructions or install this equipment. Failure
to follow safety recommendations could result
in possible damage to the equipment, serious
per
sonal injury or death.
• This equipment contains liquid and gaseous refrigerant
under high pressure. Installation or servicing should only
be performed by qualified trained personnel thoroughly
familiar with this type equipment.
• Before beginning the installation, verify that the unit
model is correct for the job. The unit model number
is printed on the data label. Follow all precautions in
the literature, on tags, and on labels provided with
the equipment. Read and thoroughly understand
the instructions provided with the equipment prior to
performing the installation and operational checkout
of the equipment.
• Never test for gas leaks with an open flame. Use a
commercially available soap solution to check all
connections See pages 12 - 13.
• Follow all precautions in the literature, on tags, and
on labels provided with the equipment. Read and
thoroughly understand the instructions provided with
the equipment prior to performing the installation and
operational checkout of the equipment.
• This unit is designed only for outdoor installations and
should be located with consideration of minimizing the