Philips VRB661AT User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Hookups without a Cable Box/Direct Broadcast System (confd)

Connect the RF coaxial cable (supplied) to the OUT Jack on the back of the

VCR and to the ANTENNA IN Jack on the TV.

(You may use either a snap-on type

(supplied) or screw-on type of coaxial cable, whichever you prefer.)

RF coaxial cable

ANTENNA IN Jack

(on back of TV)

example only

Plug in the TV and the VCR.

Set the CH3/CH4 switch on the back of the VCR to CH3 or CH4,

whichever

channel is not used or least used in your area.

Set the TV to the same channel.

For

example, when playing a tape, if the CH3/CH4 switch is set to CH3, the TV should be on

channel 03.

—AUDIO-

0L0

OUT IN

ANT

VIDEO

OUT IN

OUT

CH3 CH4

nS-

■,:h ■/

You are ready to turn on the VCR. Please go to page 11 before turning on the
VCR.