beautypg.com

Press the vcr plus+/enter button, Hélpfui hints – Philips VRB661AT User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Follow these steps to set a timer recording with the PlusCode

programming numbers in your TV guide. Before you begin;
• Set up the channels at the VCR (page 12).
• Set up theVCRPIus+ and Cable/TV channel numbers (pages

38-39).

• Set the clock (pages 15-18).
• Put a tape in the VCR.

• Make sure the VCR light appears on the display panel. If it does

not, press the VCR/TV button once.

Do each step within 60 seconds of the previous step.

40 Timer Recording with the VCR Plus+ Programming System

1

»r<

2

Press the VCR button.

Press the VCR PLUS+/ENTER button.

VCR PLUS+ PROG.

PLUS CODE : - -

TO END PUSH EXIT

3

Press the Number buttons to enter the PlusCode pro­

gramming number of the program you wish to record.
Then, press the VCR PLUS+/ENTER button.

VCR PLUS+ PROG.

PLUSCODE: 13285 -

TO SET PUSHVCR+
TO

CORRECT PUSH

CLEAR

TO END PUSH EXIT

4

Press the PLAY/.A. button or the STOP/^ button to select

a ONCE, DAILY, or WEEKLY recording.Then, press the

F.FWD/^ button.

• ONCE: The VCR will record a TV program on any day you

choose, up to 12 months away.

• DAILY: The VCR will record a program every day from Monday

to Friday - starting at the same time and recording for the same

length of time.

• WEEKLY: The VCR will record a program on the same day, at

the same time, and for the same length of time every week.

VCR

PLUS+ PROG.

\

->ONCE

DAILY

WEEKLY

SELECT CHOOSE ►

TO END PUSH EXIT

HélpfuI Hints

CODE ERROR may flash on-screen

after step 3 if you enter an incorrect

PlusCode programming number (for

example, one that is too short). The

previous screen will appear. Enter the

correct PlusCode programming num­

ber.

If CLASH flashes on-screen after step

3, the timer recording you just pro­

grammed and another timer record­

ing overlap.The current timer record­

ing will not occur.

You may use the VCR Plus+

Programming System to record pro­

grams on Cable TV channels up to

channel 125.

With ShowGuard, if the power fails

for more than one minute, pro­

grammed timer recordings will be

restored when the clock is reset.

Details are on page 52.