Philips VRB661AT - Manual (Page 50)

50 Blue Background
If you want the TV screen to be solid blue when a weak signal is
received, set BLUE BACKGROUND to ON.The screen will be
blue and the sound will be muted.
Or, if you want to receive the weak signal, set BLUE BACK­
GROUND to OFF. When you select a channel that is receiving a
weak signal, you will see and hear the static in the TV program­
ming. The channel number will not appear on the screen when
you select a weak channel.
To set BLUE BACKGROUND to ON or OFF, follow these steps.
1
*rc
2
Press the VCR button.
Press the MENU button.
SELECT CHOOSE
I
^ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
3
Press the PLAY/^ a . button or the STOP/^ button to select
VCR SET UP, then press the F.FWD/^ button.
SELECT CHOOSE ►
REPEAT PLAY OFF
ON SCREEN MODE
AUDIO OUT -------------------------------
LANGUAGE
VCR PLUS+ REF. MAP
BLUE BACKGROUND ON
VRB66I only
TO END PUSH EXIT
4
Press the PLAYZ- a . button or the STOP/^ button to select
BLUE BACKGROUND.Then, press the F.FWD/^ button
repeatedly so that OFF (or ON) appears beside BLUE
BACKGROUND.
SELECT CHOOSE ►
REPEAT PLAY OFF
ON SCREEN MODE
AUDIO OUT -------------------------------
LANGUAGE
VCR PLUS+ REF. MAP
BLUE BACKGROUND ON
TO END PUSH EXIT
5
VRB66I only
Press the STATUS/EXIT button.