Philips VRB661AT - Manual (Page 33)

Timer Recording 33
Follow the steps below to program your VCR to record TV pro­
grams while you’re away from home.The VCR will turn itself on,
record, and turn itself off automatically. Before you begin:
• Set up the channels at the VCR.
• Set the clock.
• Put a tape in the VCR. Make sure the tape’s record tab is intact
and the tape is long enough to record the program(s).
• Put the VCR in VCR position. The VCR light will appear on the
display panel. If it does not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
I
Press the VCR button, then press the MENU button.
SELECT CHOOSE I
^ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the PLAYZ- a . button or the STOP/^ button to select
PROGRAM, then press the F.FWD/^ button.
SELECT CHOOSE ►
»ONCE
DAILY
WEEKLY
PROGRAM REVIEW
TO END PUSH EXIT
3
Press the PLAY/.A. button or the STOP/^ button to select
a ONCE, DAILY, or WEEKLY recording.Then, press the
F.FWD/^ button.
• ONCE: The VCR will record a TV program on any day you
choose, up to 12 months away.
• DAILY: The VCR will record the same channel every day from
Monday to Friday - starting at the same time and recording for
the same length of time.
• WEEKLY: The VCR will record the same channel on the same
day, at the same time, and for the same length of time every
week.
Daily
Recording
(example)
DAILY PROGRAM (MON-FRI)
PROGRAM -12 3 4 5 6 7 8
SELECT PROGRAM NUMBER
TO END PUSH EXIT
Instructions continue on page 34.
Helpful Hints
If you need to make a correction
while programming a timer record­
ing, press the CLEAR button until
the cursor is flashing on the item
you want to change. Then enter the
correct information.
With ShowGuard, if the power fails
for more than one minute, pro­
grammed timer recordings will be
restored when the clock is reset
Details are on page 52.