Philips VRB661AT - Manual (Page 15)

Setting the Clock 15
There are two ways to set the clock. With manual clock setting,
you tell the VCR the current time. With automatic clock setting,
the VCR gets the current time from your local PBS station. It
keeps track of the time by constantly referring to the time broad­
casted by your PBS station.
If you are using a Cable Box or Direct Broadcast System,
you must set the clock manually.
Follow the instructions under either manual clock setting or auto­
matic clock setting (page 17) to set the VCR’s clock. Before you
begin, make sure;
• The VCR is hooked up and turned on, and channels are pro­
grammed into the VCR’s memory (see pages six-12).
• The VCR is in VCR position.The VCR light will appear on the dis­
play panel. If it does not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
Manual Clock Setting
1
*rt
2
Press the VCR button.
Press the MENU button.
SELECT CHOOSE
I
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
3
Press the PLAY/^ button or the STOP/^ button to select
SET CLOCK, then press the RFWD/^ button.
SET CLOCK
->AUTO CLOCK [ON]
SET MANUAL CLOCK
DAYLIGHT SVG TIME [ON]
SET TIME ZONE
(AUTO)
TO CONTINUE PUSH MENU
S E L E C T C H O O S E R
TO END PUSH EXIT
4
Press the PLAY/^ a . button or the STOP/^ button to select
SET MANUAL CLOCK, then press the RFWD/^ button.
TIME —
date - - / — / -
TO END PUSH EXIT
Instructions continue on page 16.
3-4
1
2
n
POWER VCfVTV EJECT
o o ©
JEcT^
STATUSiXrr CLEAR
cid S
jj
13
7 II II 8_)| llTI
VCTWlStCTEB ___ ALT. CH
D a
SPEED TIMESEAPCH PAUSE/STILL
Helpful Hints
To display the time on the TV
screen, press the STATUS/EXIT but­
ton. Details are on page 25.
Power failures that last for more
than one minute can cause you to
lose your clock setting if you set the
clock manually. If this happens, reset
the clock.