Philips VRB661AT - Manual (Page 49)

Hi-Fi Stereo Sound System (VRB66I oniy) 49
...................................
2-4
..........................
Multi-Channel Television Sound system broadcasts are automatical­
ly recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo the tapes
recorded in Hi-Fi stereo, however, you’ll need to follow steps I -5.
I
Press the VCR button, then press the MENU button.
2
Press the PLAYZ- a . button or the STOP/^ button to select
VCR SET UP, then press the RFWD/^ button.
OFF
SELECT CHOOSE i
REPEAT PLAf
ON SCREEN MODE
AUDIO OUT
LANGUAGE
VCR PLUS+ REF. MAP
BLUE BACKGROUND ON
TO END PUSH EXIT
3
Press the PLAYZ- a . button or the STOPZ^ button to select
AUDIO OUT, then press the RFWDZ^ button.
^HIFI
MONO
TO END PUSH EXIT
4
Press the PLAYZ- a . button or the STOPZ^ button to select
HIFI. ON will appear to the right of HIFI on the screen.
>HIFI ON
MONO
TO END PUSH EXIT
5
Press the STATUS/EXIT button.
y
POWER VCFVTV EJECT o o ©
fô: a UgJÆBS
, '
Helpful Hints
All programs are automatically
recorded in both Hi-Fi stereo sound
and in monaural sound.
The audio level of a tape recorded
in Hi-Fi stereo will differ from the
audio level of a tape not recorded in
Hi-Fi stereo.
Normally, HIFI should be selected
from the AUDIO OUT menu for
playback with Hi-Fi sound. But, you
can change the selection to A10N0
if you want monaural audio play­
back. To do this, follow steps 1-3. At
step 4, press the PLAY/.^ button or
the STOP/'w button to select
MONO. Press the STATUS/EXIT
button. HIFI will disappear from the
status display during TV viewing.
If you play non-Hi-Fi tapes while the
VCR is set to HIFI, the tape will play
in monaural sound.
Please see additional notes
on page 53.