Press the vcr button, then press the menu button, Press the status/exit button – Philips VRB661AT User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Up the VCR Plus* Programming System (confd) 39
2
Now, compare the channel numbers you have written in the VCR
PLUS+ CH. and CABLE/TV CH. columns. For stations whose VCR
Plus+ and Cable/TV channels do not match, you must tell the VCR
the VCR Plus+ and Cable/TV channel numbers by following steps 3
- 7. Make each entry within 60 seconds of the previous entry.
3
Press the VCR button, then press the MENU button.
4
Press the PLAY/.A. button or the STOP/^ button to select
VCR SET UP, then press the F.FWD/^ button.
5
Press the PLAY/
a
. button or the STOP/^ button to select
VCR PLUS+ REF. MAP, then press the F.FWD/^ button.
6
Look at the lists you filled in on page 38. For stations whose
VCR Plus+ and Cable/TV channels do not match, press
the PLAY/.A. button or the STOP/^ button until the arrow
is beside the VCR Plus+ channel you need.Then, press the
Number buttons to enter the corresponding Cable/TV
channel from your list. Enter all the stations on your list.
• If you are recording from line input, press 0,0 to select AUX.
Connect the audio and video cables to the AUDIO IN and
VIDEO IN jacks on the back of the VCR. (Please see illustration
on page 37.) You can not use the AUDIO and VIDEO In jacks on
the front of the VCR for this feature.
• If you are using a Cable Box/DBS, the Cable/TV channel
will be 3 or 4 (the Cable Box/DBS output channel) for
every VCR Plus+ channel. You must set the Cable
Box/DBS to the channel you want to record; leave the
Cable Box/DBS on for the timer recording.
Examine the lists on
page 38.
VCR PLUS+ CROSS REF, MAP
VCR PLUS+ CABLE/TV
124
124
125
125
TO SELECT CH PUSH
M.-W
THEN ENTER CH NO.
TO END PUSH EXIT
7
Press the STATUS/EXIT button.
Helpful Hints
> To erase a Cable/TV channel num
ber, repeat steps 3-5 on this page.
Then, press the PLAY/^ button or
the STOP/'w^ button until the arrow
appears beside the Cable/TV chan
nel you need to erase. Press the
CLEAR button, then press the STA
TUS/EXIT button.
' When you receive the VCR, all the
VCR Plus+ channel numbers and
Cable/TV channel numbers are the
same.